HRC RACING batteries are known for its quality and performance. Each battery match the high quality standards of HRC RACING. High output power and capacity as well as low internal resistance at lowest weight and shape make each HRC RACING battery a winner in his category.
Size & weight
160gramm
35x26x90mm
HRC06322D
Battery – LiPo 3S – 11.1V 2200mAh 70C – HRC 2200 – Ultra T Plug – 35x26x90mm
HRC RACING products are known for its quality and performance. Each product match the high quality standards of HRC RACING. High precision and durability at lowest weight to offer the best performace to your R/C model.
This cooling device called Freezer is simply connected to the receiver of your model. It help to reduce heat to increase the performance and lifetime of your motor.
Can fit motors with 40-42mm diameter. Include quick installation guide for easy installation.
Size: 54x59mm, 61x66mm
HRC5836
Motor Heat Sink – with Fan – 1/8 motor with 40-42mm diameter – Freezer
This hook and loop tape is ideal for attaching batteries and other components.
HRC RACING items are known for their quality. Each article meets the high quality standards of HRC RACING.
HRC5046A
Hook and loop tape with eyelet – black with logo – 15x200mm (compatible with Velcro)
HRC5046B
Hook and loop tape with eyelet – black with logo – 15x250mm (compatible with Velcro)
This tool tip set from HRC RACING is a great upgrade for every serious racer. The tips are made of titanium coated steel for extra lifetime of tips. It also help to save your screws and add lifetime. Fits most electric tools on the market.
HRC4054N
Tool – HEX tips set for electric screwdriver – Titanium coated – 4.0/5.5/7.0/8.0 mm Sockets
HRC RACING batteries are known for its quality and performance. Each battery match the high quality standards of HRC RACING. High output power and capacity as well as low internal resistance at lowest weight and shape make each HRC RACING battery a winner in his category.
This HRC Racing lipo battery is protected by a durable hardcase and offers great power to every model up to 8th scale. Great capacity and performance on small size.
Compatible with standard 2s sized battery compartements.
Size: 138 x 45 x 25mm
Weight: 300 gramm
Cable: 12 AWG
HRC02272X
Battery – LiPo 2S – 7.4V 7200mAh 50C – Hard Case – XT90AS 46.5*25*138.5mm
HRC RACING batteries are known for its quality and performance. Each battery match the high quality standards of HRC RACING. High output power and capacity as well as low internal resistance at lowest weight and shape make each HRC RACING battery a winner in his category.
This HRC Racing lipo battery is protected by a durable hardcase and offers great power to every model up to 8th scale. Great capacity and performance on small size.
Compatible with standard 2s sized battery compartements.
Size: 138 x 45 x 25mm
Weight: 300 gramm
Cable: 12 AWG
HRC02272E
Battery – LiPo 2S – 7.4V 7200mAh 50C – RC Car – Hard Case – EC5 46.5*25*138.5mm
HRC RACING batteries are known for its quality and performance. Each battery match the high quality standards of HRC RACING. High output power and capacity as well as low internal resistance at lowest weight and shape make each HRC RACING battery a winner in his category.
This HRC Racing lipo battery is protected by a durable hardcase and offers great power to every model up to 8th scale. Great capacity and performance on small size.
Compatible with standard 2s sized battery compartements.
Size: 138 x 45 x 25mm
Weight: 295 gramm
Cable: 12 AWG
HRC02267E
Battery – LiPo 2S – 7.4V 6700mAh 50C – RC Car – Hard Case – EC5 Plug 138x45x25mm
This is a Megalodon Blake Wilkey Edition Desert Buggy Black Body. Pro-Line is proud to collaborate with Shreddy Lyfe’s own Blake Wilkey on a re-creation of The Megalodon: a dune-shredding, wheelie-popping, supercharged V8-powered beast of a buggy! You may remember Blake from the infamous Urban Assault video tearing up the streets of San Diego. Now, you can create your own viral videos by transforming your Slash® 2wd or Slash ® 4×4 with this officially-licensed, super scale body! All the details of Blake’s beast are captured including molded engine details, roof-mounted air scoop, add-on rear fenders, and shark-inspired side wings.
The Blake Wilkey Edition Megalodon is molded in our durable Tough-Color Black material, which means you can go full-send without any fear of paint chipping off since the black is infused directly into the material. A fully precut wrap is included to deck out your Megalodon with Blake’s sponsors and signature fluorescent pink & teal livery. Window details are also included with optional Wilkey & co-pilot driver figure stickers.
To create the most scale Megalodon possible, we recommend using Hyrax SCXL 2.2″/3.0″ tires for that killer oversized look. Thrash your local bash spot with the new Megalodon body from Pro-Line and Shreddy Lyfe!
Features:
Fully Licensed Replica of Blake Wilkey’s Megalodon
Incredible Scale Details
Pre-Cut Wrap with Sponsor Logos & Livery
Made from Durable Tough Color Black Polycarbonate
Four steps to Shred Ready:
1.) Follow the included instruction sheet to trim your body
2.) Add Wrap graphics
3.) Attach Rear Fenders
4.) Mount your new body onto your a SC
Fits:
Slash® 2wd
Slash® 4×4
Losi® Tenacity® TT Pro 4WD (with modifications)
Use LOS230079 LED, Cage Parts from Lasernut kit to replace front bumper and front body mounts.
Specs:
Length: 19″ (482mm)
Width at Front 6.5″ (166mm)
Width at Rear: 8.5″ (215mm)
Width at Doors: 7.5” (190mm)
Height: 5.8″ (156mm)
Wheelbase: 13.2″ (335mm)
Digital Servo – Double Ball Bearing – Metal Gear.
Our new High Quality 68110DMG Digital Metal Gear servo has been especially designed for 1/10 On and Off Road cars and is able to provide you entire satisfaction in many other usages.
Digital Servos are made for high precision steering commands. We recommend our analog servos for constant load usage (Crawler, road trucks..)
Features:
Waterproof servo case, Metal Gear, Double Ball Bearings, Heavy Duty servo horns, Heavy Duty servo cable!
Technical Datas:
Voltage: 4.8 ~ 6.0 Volts
Signal type: Analog
Bearings: Double Ball Bearings
Gear: Metal Gear
Torque: 9.2kg/cm @ 4.8V // 10.4kg/cm @ 6.0V
Speed: 0.14s/60° @ 4.8V // 0.12s/60° @ 6.0V
Dimensions: 40.0 x 38.3 x 20mm
Weight: 52.0g
Servo arm: 25 splines
Case: Nylon Fiber
Cable: 300mm 22AWG Heavy Duty cable
Connector: UNI Plug
HRC68110DMG
Servo – Digital – 40x38x20mm / 52g – 10kg/cm – Metal Gear – Waterproof – Double Ball Bearing
Aluminium servo horn for better power distribution.
Total length: 35mm
