HRC RACING batteries are known for its quality and performance. Each battery match the high quality standards of HRC RACING. High output power and capacity as well as low internal resistance at lowest weight and shape make each HRC RACING battery a winner in his category.
526g
138mm*48*47
HRC04469D
Battery – LiPo 4s HARDCASE – 14.8V 6900mAh 60/100C – Ultra T – 138mm*48*47
HRC RACING batteries are known for its quality and performance. Each battery match the high quality standards of HRC RACING. High output power and capacity as well as low internal resistance at lowest weight and shape make each HRC RACING battery a winner in his category.
95 x 45 x 25mm
202 Gramm
Connector: 5mm & 2mm bullet + adapter for Deans Ultra T
HRC02254SR5
Battery – LiHV 2S – 7.6V 5400mAh 110C – Graphene – Shorty 5mm 95x45x25mm
HRC RACING batteries are known for its quality and performance.
Each battery match the high quality standards of HRC RACING.
High output power and capacity as well as low internal resistance at lowest weight and shape make each HRC RACING battery a winner in his category.
95 x 45 x 22mm
183 Gramm
Connector: 5mm & 2mm bullet + adapter for Deans Ultra T
HRC02246SR5
Battery – LiHV 2S – 7.6V 4600mAh 110C – Graphene – Shorty – 4mm 95x45x22mm
With the shock absorber pliers from HRC RACING you can hold the shaft of your shock absorber without damaging or scratching it. Useful tool for maintenance work on your R/C model.
HRC4032
Tool – Shock Shaft Plier V2
HRC RACING batteries are known for its quality and performance. Each battery match the high quality standards of HRC RACING. High output power and capacity as well as low internal resistance at lowest weight and shape make each HRC RACING battery a winner in his category.
This HRC Racing lipo battery is protected by a durable hardcase and offers great power to every model up to 8th scale. Great capacity and performance on small size.
Compatible with standard 2s sized battery compartements.
Size: 138 x 45 x 25mm
Weight: 300 gramm
Cable: 12 AWG
HRC02272D
Battery – LiPo 2S – 7.4V 7200mAh 50C – RC Car – Hard Case – Ultra T 46.5*25*138.5mm
The HRC Racing Transporter is the perfect bag to carry your car model.
This bag is named “Transporter” because it is perfect to carry your model and protect your car and home from dirt. We added thin bottom plate to make it more stable. A strap offers additional fixation for your car model. The backbag function allows to carry your car on your back and have your arms free to carry more or go by bike.
– Carry bag for 8th scale sized Monster & Truggy
– Cool design
– Made from durable fabric
– Bottom plate for more stability
– backbag function (patent pending)
– 54x44cm
HRC9931XL
Bag – HRC Transporter Car bag – XL 54x44cm – 1/8 Monster & Truggy
JOYSWAY products are among the world’s leading brands in the R/C market. The name is a synonym for quality and innovation. The JOYSWAY range includes racing boats, sailboats and aircraft in various sizes, from entry-level models to models for ambitious pilots.
The Magic Vee boat is a small speedster. It is best suited for small to medium-sized lakes and ponds. The Magic Vee boat comes with an ABS boat stand, so you can always park your boat safely. The USB charger is perfect for charging your boat anywhere. The motor of the Magic Vee is water-cooled, so the best performance is achieved.
JOY8106V5
Race Boat – Electric – RTR – Magic Vee V5 – 2.4G – with 6.4V 320mAh LiFe & USB/12V Charger
SPECIFICATIONS:
Hull Length: 225 mm
Total Length: 270 mm
Width: 70 mm
Weight: 160g(RTR)
Hull Material: Plastic Molded Hull with colorful painting & decal stickers
Connector: JST-BEC
WHAT’S INCLUDED:
Hull with Graphic and Assembly Finished
2.4G 2CH digital proportional radio control system
Powerful water cooled 180 motor
Water proof 5A ESC & Receiver combo set
9g waterproof rudder servo
6.4V 320mAh LiFePo4 pack
USB charger & USB DC adapter
9V dry batter (for transmitter)
ABS boat stand
REQUIREMENTS:
All included, ready to run
JOY8108V5
Race Boat – Electric – RTR – Magic Cat V5 – 2.4G – with 6.4V 320mAh LiFe & USB/12V Charger
SPECIFICATIONS:
Hull Length: 220 mm
Total Length: 265 mm
Width: 72 mm
Weight: 170g(RTR)
Hull Material: Plastic Molded Hull with colorful painting & decal stickers
WHAT’S INCLUDED:
Hull with Graphic and Assembly Finished
2.4G 2CH digital proportional radio control system
Powerful water cooled 180 motor
Water proof 5A ESC & Receiver combo set
9g waterproof rudder servo
6.4V 320mAh LiFePo4 pack
USB charger & USB DC adapter
9V dry batter (for transmitter)
ABS boat stand
Connector: JST-BEC
REQUIREMENTS:
All included, ready to run
Matching battery:
JOY810604
JOY8203V2
Race Boat – Electric – RTR – Mad Shark V2 – 2.4G – with 7.4V 800mAh Li-Ion & AC Balance Charger
SPECIFICATIONS:
Hull Length: 368 mm
Total Length: 443 mm
Width: 172 mm
Weight: 600g(RTR)
Hull Material: Plastic Molded Hull with colorful painting & decal stickers
Battery compartement size: 55 x 34 x 17mm
Ultra T connector (Deans compatible)
WHAT’S INCLUDED:
Hull with Graphic and Assembly Finished
Powerful water cooled 390 brushed motor with Gear Box
Water proof & water cooled 15A ESC & Receiver combo set
9g waterproof rudder servo
2.4G 2CH digital proportional radio control system
7.4V 800mAh Li-ion battery pack
Balance charger with EU plug AC Power cable
2 Blades Nylon propeller
9V dry battery (for transmitter)
Shaft drive system: 2.3mm flex cable drive
Gift box and polyfoam tray packing
Boat display stand
SPECIFICATIONS:
Hull Length: 368 mm
Total Length: 443 mm
Width: 172 mm
Weight: 600g(RTR)
Hull Material: Plastic Molded Hull with colorful painting & decal stickers
Self Righting Hull Design, No worry Boat Capsize
Ultra T connector (Deans compatible)
WHAT’S INCLUDED:
Hull with Graphic and Assembly Finished
Powerful water-cooled out-runner brushless motor
Water proof & water cooled 30A brushless ESC with BEC
9g waterproof rudder servo
2.4G 2CH digital proportional radio control system
P1.4 x D35mm two Blades propeller x 2pcs
11.1V 1500mAh 40C XT60 LiPo pack
Balance charger with EU plug AC Power cable
Shaft drive system: 2.3mm flex cable drive
Gift box and polyfoam tray packing
Boat display stand
REQUIREMENTS:
4 x AA Alkaline batteries for transmitter (Not included)
SPECIFICATIONS:
Hull Length: 360 mm
Total Length: 420 mm
Width: 120 mm
Weight: 480g(RTR)
Hull Material: Plastic Molded Hull with colorful painting & decal stickers
Battery compartement size: 55 x 34 x 17mm
Ultra T connector (Deans compatible)
WHAT’S INCLUDED:
Hull with Graphic and Assembly Finished
2.4G 2CH digital proportional radio control system
Powerful water cooled 390 motor
Water proof & water cooled 15A ESC & Receiver combo set
9g waterproof rudder servo
7.4V 800mAh Li-ion battery pack
Balance charger with EU plug AC Power cable
2 Blades Nylon propeller
9V dry battery (for transmitter)
ABS boat stand
REQUIREMENTS:
All included, ready to run
HRC RACING charge cables are made of high quality and long lasting materials using 600mm long super flexible silicone wire. The HRC RACING charge cables are compatible with most common chargers.
Available with XT60/XT90/XT30/CT4/TRX/Tamiya/EC5/EC2/EC3/MPX/BEC/Molex/Ultra T, Futaba, Crocodile or 4mm male charger connector access. Choose your charge cable type from different HRC RACING charge cable.
HRC9103-6
Charger Lead – 4mm Bullet to XT30 – 600mm Gold
These high quality foam tires from HRC RACING comes preglued on durable wheel. It offers great performance on asphalt and carpet. Compatible with most 1:10 scale models.
– high quality foam
– 12mm hex adapter
Presenting the latest in aero performance and styling for 1:10 Nitro from PROTOform: P47-N.
The P47 is the next evolution of the IFMAR World Title-winning P37. Featuring all-new aero concepts and some design cues never before seen in the class, the P47 was exhaustively tested by our team to find a body that offers more precise and smooth steering, increased corner speed and forward bite, and additional top speed on long straights. A raised section of the left side window can be cut out to scoop air into the body for additional engine cooling, and a large high-downforce/low-drag wing complete the design.
In 2018, the P47 reached the pinnacle of 1:10 Nitro sedan racing, being used by Naoto Matsukura to capture the IFMAR 1:10 IC Track World Championship in Homestead, Florida.
This body meets all EFRA (#2058), IFMAR and ROAR body rule requirements and is available in three weights of high-quality polycarbonate: .020″ (X-Lite weight, for expert drivers only, best for on high-grip conditions weights of high-quality polycarbonate, .025″ (light weight) and .030″ (regular weight). Included with the P47 is a decal sheet, paint-then-peel overspray film, window masks and durable nylon wing mounting hardware.
Length: 434mm
Width: 203mm
Height: 111mm
Wheelbase: 258mm
Including:
Clear P47 Body
Decal Sheet
Wing Mounting Hardware (4 pcs)
Paint-then-peel Over Spray Film & Window Masks
Features:
Precise and Smooth Steering feel
Increased Corner Speed and Forward Bite
Added Straightaway Speed
Integrated Window Scoop to Improve Engine Cooling
Made in the USA
EFRA LEGAL #2058
Fits:
200mm TC
PL1554-20
Karosserie – 1/10 Touring – 200mm – Unlackiert – P47 X-Lightweight
From the moment rumors surfaced that Chevy® was reinventing the legendary Corvette™ into a mid-engine supercar, all of us at PROTOform were waiting with bated breath to see what our future GT racing body would look like. PROTOform is now proud to bring one of the most anticipated cars Chevrolet® has ever built to 1:12 scale with their release of the Corvette™ C8 body for 1:12 pan cars.
This officially licensed body is perfectly suited for GT12 class racing. All the exceptional details of its 1:1 counterpart including aggressive cab forward design, striking front splitter, and sculpted side doors and vents are captured using the latest in 3D CAD and 5-axis milling technology. The extensive decal sheet lets you deck out your C8 with Corvette™ branded windshield headers, number plates, “Jake” skulls and USA flags.
The C8 fits any 1:12 pan car or GT12 specific chassis and is formed from high-quality lightweight polycarbonate with paint-then-peel overspray film. It also includes an add-on rear wing with multiple trim heights for aero adjustability, wing mounting hardware and window masks.
Specs:
Length: 345mm
Width:
FRONT: 170.5mm
REAR: 175mm
Wheelbase: 200mm
Height: 78mm
Features:
Incredible Scale Details
Officially-licensed by General Motors®
GT12 Ready
Made in the USA
Including:
Clear Corvette™ C8 body
Wing Hardware
Extensive Decal Sheet
Paint-then-Peel Over Spray Film, & Window Masks
Fits:
GT12
PL1575-20
Body – 1/12 On Road – Clear – Chevrolet C8 for GT12
